春林门窗

联系我们
济南槐荫春林门窗厂
地址:济南栗山路美里湖消防站对面
电话:13506414902
手机:13506414902
联系人:张经理
当前位置:首页-新闻资讯 -公司动态
公司动态
断桥铝门窗设备在日常生活中应检查的三个部位
来源: 2015-11-20 15:44:46
检查接地
Check the grounding
济南断桥铝门窗设备除直线布置形式的焊接机及水槽铣床等少数设备为单相电源供电外,其余设备均为三相四线制供电.为确保人员安全,设备应按规定要求可靠接地,并在每次开机前都应检查接地是否有效.检查润滑部位
Broken bridge aluminum alloy doors and Windows equipment in addition to the straight line layout forms of welding machine and sink a few equipment for single-phase power supply such as milling machine, the rest of the equipment are in three phase four wire system power supply. In order to ensure the personnel safety, equipment shall be in accordance with the requirements and reliable grounding, and should check whether the ground is effective in front of the computer. Check the lubrication part
对于断桥铝合金门窗设备运行中具有相对运动的定动接触面,如机床导轨表面、各处轴承与轴等处需要润滑的部位,应根据运动特性等方面的因素,加注润滑油或润滑脂进行润滑.
For the broken bridge aluminum alloy doors and Windows in the operation of the equipment has the relative motion of the moving contact surfaces, such as machine tool guideway surface, everywhere the place such as bearings and shaft need lubricating parts, should according to the movement characteristics of factors, filling lubricating oil or grease lubrication.
具体设备机械结构不同,其润滑部位及润滑方式也不相同,需视具体设备而定.在门窗设备中大量使用的气源处理三联体,每次开机之前都要检查其油雾器油杯内的油面高度,并使之保持准确的油面高度.
Specific equipment mechanical structure, the lubrication parts and lubrication methods are different, depending on the specific equipment. Air is used in great quantities in the doors and Windows equipment processing triplet, every boot before to check the oil level of oil mist in the oil cup of height, and make it keep accurate height of oil level.
检查门窗设备供电、供气情况
Check the doors and Windows equipment power supply, gas supply situation
断桥铝合金门窗设备大多数为电气及气动控制设备,应保证正常的供电及供气,以便保证断桥铝合金门窗设备正常运行.否则,轻者可能产生不能如期工作或影响加工质量等问题,重者可能引发安全事故.所以开机工作之前,对断桥铝合金门窗设备供电、供气情况的检查,对于保证正常生产十分重要.
Broken bridge aluminum alloy doors and Windows equipment most for the electric and pneumatic control equipment, should guarantee the normal power supply and gas supply, in order to ensure the normal operation of broken bridge aluminum alloy doors and Windows equipment. Otherwise, light person can't work on schedule may be produced or affect the machining quality problem, the person that weigh can cause accidents. So the boot before work, the broken bridge aluminum alloy doors and Windows equipment power supply, gas supply situation of inspection, to ensure the normal production is very important.
[声明] 本站图片均由网站所有方提供,部分图片来源于网络,如有任何疑问请第一时间与我们联系,未经沟通本站不承担相关法律责任!
在线咨询