断桥铝门窗设备端面铣床的优势
一、大型工作台、大走刀行程.一次可加工6至10根型材.
A large table, a large walking knife stroke. One can process 6 to 10 profiles.
二、位置可调整的多片刀具,使换产品时不必换刀具,从而节约生产准备周期和刀具费用.
Two, the position can adjust the multi chip tool, so that the replacement of the product without having to change the cutting tool, so as to save the production preparation cycle and cutting tool costs.
三、根据不同的型材,多组刀可以同时工作也可以单独工作.
Three, according to the different profiles, multi group knife can also work independently.
四、大的刀具直径,使加工面质量好.
Four, the greater the tool diameter, so that the processing surface quality is better.
五、液压阻尼气缸推动刀具进给,工作平稳.
Five, hydraulic cylinder to promote the hydraulic cylinder feed, work more smoothly.
六、加厚的型材压板,防止型材变形.
Six, thick section of the profile, to prevent deformation.
