春林门窗

联系我们
济南槐荫春林门窗厂
地址:济南栗山路美里湖消防站对面
电话:13506414902
手机:13506414902
联系人:张经理
当前位置:首页-新闻资讯 -行业动态
行业动态
分析门窗装修中造成门窗闭合不严的原因及解决办法
来源: 2016-03-09 11:58:31
分析门窗装修中造成门窗闭合不严的原因及解决办法:
Decorate doors and Windows in Windows and doors closed lax by analyzing the cause and solution:
现象:我们在推拉或启闭门窗时门窗框晃动,遇到风雨天气晃动的更厉害。
Phenomenon: when we are in the push and pull or opening and closing doors and Windows shaking door window frame, swaying in wind and rain weather.
造成此现象的原因:
The causes of this phenomenon:
1、安装节点未按规定去做。济南铝木复合门窗
1, install nodes do not according to stipulations.
2、没有根据不同的墙体采用合理的固定方法。
2, not according to the different wall adopts reasonable fixed method.
3、塑钢门窗的内衬钢配置不符合我们的使用标准,(一般钢内衬要用1.20,因为很多业主不懂,就有好多商家利用这点把不合格的给业主安装)钢材壁薄且强度差;安装时内衬钢分段插入,无法形成整体加强作用;内衬钢与塑料型材连接不牢等原因。
3, of window of model steel door lined with the use of steel configuration doesn't meet our standards, (general steel lining to 1.20, because many owners do not understand, there is a lot of businesses use this give owner unqualified installation) strength of steel thin wall and poor; Lining steel block insert when installation, unable to form the overall strengthening; Lined with steel and plastic material connection rickety wait for a reason.
4、我们在选择的型材不符合规格,断面较小,强度不够。如果是铝合金门窗,则是因为材料的防范不符合要求。若家里安装的是塑钢门窗,那就是质量选择方面不合格。
4, we in the choice of material is not in conformity with the specifications, the cross section is small, the strength is not enough. If it is a window of aluminium alloy door, because of the material to prevent does not conform to the requirements. If the installation of window of model steel door is in the home, that are not qualified to choose quality.
解决方法:
The solution:
1、根据门窗洞口尺寸、安装高度选择型材截面,平开窗不小于55系列,推拉窗不小于75系列。
1, according to the door to the hole size, choice of installation height profile section, casement Windows is not less than 55 series, push-pull window not less than 75 series.
2、严格按规范规定安装,确保牢固稳定,更好在安装时找一个比较懂的人帮忙监督。
2, the strict installation, as stipulated in the specification to ensure a solid, best to find a more understand when installation supervision person to help.
3、注意检查塑料型材的外观,合格的型材应为青白色或象牙白色,洁净、光滑。质量较好都会有保护膜。
3, check the appearance of the plastic material, qualified profiles should be bluish white or ivory white, clean and smooth. Better quality will have protective film.
4、我们在购买门窗框型时要注意规格、数量符合国家标准。铝合金型材的外框壁厚不能小于2.4mm。塑钢窗料厚度不能小于2.5mm。
4, we should pay attention to when buying door window frame type specification and quantity in accordance with national standards. The aluminum frame wall thickness not less than 2.4 mm. Model steel window material thickness not less than 2.5 mm.
[声明] 本站图片均由网站所有方提供,部分图片来源于网络,如有任何疑问请第一时间与我们联系,未经沟通本站不承担相关法律责任!
在线咨询