春林门窗

联系我们
济南槐荫春林门窗厂
地址:济南栗山路美里湖消防站对面
电话:13506414902
手机:13506414902
联系人:张经理
当前位置:首页-新闻资讯
新闻资讯
济南春林断桥隔热门窗的加工
来源: 2016-09-26 17:45:50
1、断桥隔热门窗加工制作应在工厂内进行,不得在施工现场制作,门窗制作应符合设计和断热铝合金门窗安装及验收规范要求,断热铝合金门窗框应安装牢固门窗应推拉、开启灵活,窗台处应有泄水孔,并应设置限位装置。紧固件应符合有关技术规程的规定;五金件型号、规格和性能均应符合国家现行标准的规定。
1, doors and Windows processing production of the heat insolation that shall be conducted in the factory, may not be made in the construction site, Windows and doors production should comply with the design and break hot aluminum alloy doors and Windows installation and acceptance specification requirements, break hot aluminum alloy door and window should be installed firmly doors and Windows should push and pull, open and flexible, windowsill place shall have the drain hole, and should set the limit switch. Fasteners shall comply with the provisions of the relevant technical regulations; Hardware type, specification and performance shall comply with the provisions of the current national standard. 
2、推拉窗滑道上的排水孔加工应遵循内扇外孔、外扇内孔的原则,以保证门窗的密封性能,尤其是下横毛条水平朝向的推拉窗。
Drainage holes 2, push-pull window track processing should be followed in the principle of bore hole, external fan, to ensure the sealing performance of doors and Windows, especially under transverse toward the push-pull window of wool top level. 
3、断桥隔热门窗组装前,应清除端部加工毛刺,端部节点以及型材结合部必须采取防水胶等密封措施,以防止结构渗水。
3, doors and Windows before the assembly of the heat insolation, should remove the end machining burrs, end node and the integration of a profile must be taken to waterproof glue sealing measures, such as to prevent water seepage structure. 
4、隐框窗的结构装配组合件必须在净化的室内制作和养护。
4, the structure of the hidden frame window assembly assembly must be made in purifying indoor and curing. 
5、必须用溶剂清除玻璃和铝框粘结表面的尘埃、油渍和其它污物;每清洁一个构件或一块玻璃,应换清洁的干擦布;溶剂应倾倒在擦布上,严禁擦布接触溶剂瓶口。注胶必须饱满,不得出现气泡、漏注,胶缝表面应平整光滑;收胶缝的余胶不得重复使用。
5, must be clear glass and aluminum frame using solvent bonding surface dust, grease and other contaminants; For each component or a piece of glass, clean clean dry clean cloth should be changed; Solvents should be dumped on the clean cloth, wipe cloth contact solvent bottle is strictly prohibited. Note glue must be full, and may not appear bubbles, leakage, glue line surface should be smooth; The residual adhesive glue line shall not be reused. 
本文由济南断桥铝门窗为您提供,我们的网站是:  http://www.jnclmcc.com我们将以全心全意的热情为您提供优质的服务,欢迎您的访问!
This article provided by jinan broken bridge aluminum doors and Windows for you, our website is: http://www.jnclmcc.com, we will with wholehearted enthusiasm to provide you with more excellent service, welcome your visit! 

[声明] 本站图片均由网站所有方提供,部分图片来源于网络,如有任何疑问请第一时间与我们联系,未经沟通本站不承担相关法律责任!
在线咨询