春林门窗

联系我们
济南槐荫春林门窗厂
地址:济南栗山路美里湖消防站对面
电话:13506414902
手机:13506414902
联系人:张经理
当前位置:首页-新闻资讯 -公司动态
公司动态
关于肯德基门的安装步骤
来源: 2018-06-22 16:03:07
现在很多店铺和商家都会选择安装济南肯德基门,因为肯德基门无论时从质量还是外观都是消费者比较满意的,再加上使用起来是比较方便的,开关自如节省了许多时间,但是有的客户表示对肯德基门安装步骤不是很清楚,下面济南肯德基门厂家的小编给大家详细介绍一下肯德基门的安装步骤。
Now many shops and businesses will choose to install Ji'nan Kentucky gate, because Kendl Ki Men, both from the quality and the appearance are satisfied with the consumer, and the use is more convenient, the switch saves a lot of time, but some customers say that the Kentucky gate installation steps are not very clear, Ji'nan KFC door manufacturer Xiaobian to give you a detailed description of Kendl Ki Men installation steps.
一步:清理门洞,剔除多余部分、保证门框两侧都在垂直线上;

The first step is to clean up the door, eliminate the unnecessary parts and ensure that both sides of the doorframe are on the vertical line.

济南肯德基门

第二步:用螺丝或柳钉组合门框的三支型材,然后固定门框与墙体之间的链接;
The second step: use the screws or willow nails to combine the three sections of the doorframe, then fix the links between the doorframe and the wall.
第三步:安装地轴,固定地轴时从顶轴的中心线垂直至地轴轴承的中心,在地面开出与地轴盒长、宽、高度相符的尺寸,用螺丝或水泥沙浆固定好地轴;
The third step is to install the ground shaft, when the fixed axis is fixed from the center line of the top axis to the center of the bearing of the ground shaft, the size that is consistent with the length, width and height of the ground box is drawn on the ground, and the ground shaft is fixed with screw or cement mortar.
第四步:安装济南肯德基门的门体。松开门扇上的防盗卡位螺丝,抽出上轴的轴心部分;在地轴轴承上抹上润滑油以使门扇开合自如,增加使用寿命;
Fourth step: install the Kentucky gate in Ji'nan. Loosen the anti-theft screw screw on the door leaf, pull out the shaft part of the upper shaft, lubricate the bearing on the ground shaft so that the door leaf can be opened and unblocked, and the service life is increased.
第五步:调试门扇。调试门扇的前后左右方向:打开地轴盒盖板,用扳手调节地轴的螺丝;调试门扇的高低间隙方法:调试下轴上的内六角螺丝,顺时针调试门扇上升,逆时针调试门扇下降;
Fifth step: debug the door fan. Debug the front and left direction of the door: open the cover plate of the shaft box, adjust the screw of the ground shaft with the wrench, debug the high and low gap method of the door fan, debug the inner six angle screws on the shaft, debug the door fan clockwise, and debug the door fan against clockwise;
第六步:紧牢防盗卡位螺丝;
The sixth step: tighten up the anti-theft card screw;
第七步:安装调试闭门器,见闭门器配套说明书,安装完毕。
The seventh step: install and debug the door closer, see the door closer, complete the installation.
如有需要,欢迎新老客户前来选购!我们本着质优价廉的宗旨来为您提供产品和服务。真诚期待与您合作!
If there is a need, welcome new and old customers to choose and buy! We aim to provide products and services for you with the aim of quality and low price. Sincerely look forward to working with you!
[声明] 本站图片均由网站所有方提供,部分图片来源于网络,如有任何疑问请第一时间与我们联系,未经沟通本站不承担相关法律责任!
在线咨询