春林门窗

联系我们
济南槐荫春林门窗厂
地址:济南栗山路美里湖消防站对面
电话:13506414902
手机:13506414902
联系人:张经理
当前位置:首页-新闻资讯
新闻资讯
阳光房断桥铝门窗质量达标,需求留意的要求
来源: 2018-08-11 14:19:45
密闭性要求、防渗漏要求、框扇结构要求、保温隔热要求、安全技能要求
Requirements for airtightness, leakage prevention, frame fan structure, heat insulation and safety skills
阳光房规划、收购、施工过程中清晰外门窗的技能要求,到达抗风压、水密性、气密性、保温、隔声、采光、安全等方面的功能要求,避免外门窗工程常见问题的重复发作,济南阳光房共享门窗质量控制五大要害点,掌握这五大规范,门窗质量没有不好的!
The technical requirements of clear external doors and windows in the process of planning, acquisition and construction of sunshine houses can meet the functional requirements of wind pressure resistance, water tightness, air tightness, heat preservation, sound insulation, lighting, safety and so on, avoid the recurrence of common problems in the project of external doors and windows. The five key points of quality control of shared doors and windows in Jinan sunshine houses should be mastered. Big specification, the quality of doors and windows is not bad.
密闭性要求
Tightness requirements
1、角部密封条(胶角):密封条应避免转角拼接,应将转角处密封条规划成90度整体式胶角。
1. Corner sealing strip (glue angle): The sealing strip should avoid corner splicing, and the corner sealing strip should be planned into 90-degree integral glue angle.
2、框扇密封条:敞开扇部位宜规划三道密封胶条,别离为主密封胶条、扇压边胶条和框压边胶条。
2. Frame-fan sealing strip: Three sealant strips should be planned in the open fan area, separated from the main sealant strip, fan blank holder strip and frame blank holder strip.
防渗漏要求
Leakage prevention requirements
1、外窗有必要设置排水通道、排水口、排气孔(气压平衡孔),排出窗框扇内积水。排水口外侧应设扣盖,避免强风将雨水、尘埃吹入窗扇。
1. It is necessary to set up drainage channel, drainage outlet and exhaust hole (air pressure balance hole) in the outer window to discharge the water accumulated in the window frame and fan. The outside of the outlet should be provided with a buckle cover to prevent the strong wind from blowing the rain and dust into the window sash.
2、隔热条应选用C型结构,与表里铝型材复合后在同一个水平面上,避免隔热条处积水构成渗漏、腐蚀危险,一起可添加隔热条长度,进步热工功能。
2. Heat insulating strip should be C-shaped structure, and the surface of the aluminum profile composite in the same horizontal plane, to avoid the heat insulating strip water leakage, corrosion risk, together with the length of heat insulating strip can be added to improve the thermal function.
3、门窗洞口尺度:结构洞口预留不该过大,避免封堵困难构成渗漏危险。
3. Size of entrance of doors and windows: Reserved entrance of structure should not be too large to avoid leakage danger caused by sealing difficulties.
4、企口:窗洞因为特别原因,如外墙为石材幕墙,洞口预留尺度大,结构洞口主张做企口,企口应与混凝土墙一起浇筑。
4. Gate: Because of special reasons, such as stone curtain wall for the external wall, hole reserved large scale, structure hole advocate to do the mouth, mouth should be poured with concrete wall.
5、外窗台板:外墙材料为涂料的修建,主张选用金属窗台板。金属窗台板内侧应压入窗框,外侧杰出墙面做滴水。
5, outside window plank: the outer wall material is the construction of the paint, advocate to choose metal window sill. The inner side of the metal window sill should be pressed into the window frame, and the outer wall should be dripping.
6. 窗框与结构洞口:窗框宜立中装置,如靠外侧装置,应向内收进20mm,避免结构施工差错导致窗框装置在结构外皮以外,构成雨水渗漏。
6. Window frame and structural opening: window frame should be erected in a neutral device, such as by the lateral device, should be retracted inward 20 mm, to avoid structural construction errors lead to the window frame device outside the structure skin, constitute rain water leakage.

济南阳光房

框扇结构要求

Frame fan structure requirements
1、组角:组角是关系到门窗整体性的重要工序。
1, group angle: group angle is an important process related to the integrity of doors and windows.
2、抹胶工艺:一般情况下应选用角码+抹组角胶工艺,窗角制止未抹胶即揉捏成型。
2. Plastering process: Generally speaking, corner code plus plastering group should be chosen, window angle should be prevented from plastering or kneading.
3、注胶工艺:组角亦可选用角码+导胶槽+注胶孔+双组份注胶+角片工艺,确保角部强度要求,确保门窗成品在运输、装置后无变形移位现象的呈现。
3. Glue injection process: corner code + glue chute + glue injection hole + two-component glue injection + glue filler can also be used to ensure corner strength requirements, to ensure that the door and window products in the transport, device after no deformation and displacement phenomenon.
保温隔热要求
Thermal insulation requirements
1、型材的腔体规划:型材应选用多腔体结构,削减热量的丢失,一起应使外窗隔热构件上下共面,构成整体隔热面,消除冷桥,阻断热量丢失通道。
1. Profile cavity planning: Profile should choose multi-cavity structure to reduce the loss of heat, together should make the outer window insulation components up and down together, constitute the overall insulation surface, eliminate the cold bridge, blocking the heat loss channel.
2、玻璃装置槽内宜装置隔热胶条:添加空气腔室的数量,降低中空玻璃四周与型材之间的热量丢失,进步整窗的保温效果。
2. Insulation tape should be installed in the groove of glass device: the quantity of air chamber is added to reduce the heat loss between the hollow glass and the profiles and improve the whole window insulation effect.
3、窗扇应选用T型隔热条规划:窗扇隔热条规划为T型,与中心胶条搭接,实现扇框衔接处冷热分区。制止将中心胶条直接搭在扇的铝型材上。
3. The window should be planned with T-type heat insulating strip: the window should be planned with T-type heat insulating strip, which is overlapped with the central rubber strip to realize the cold and hot zoning at the junction of the fan frame. The central adhesive strip should be directly covered on the fan aluminum.
5、玻璃暖边条:双层中空玻璃空腔四周宜设置暖边条,阻断玻璃空腔散热通道。
5. Glass warm edge: Double-layer hollow glass cavity should be set around the warm edge, blocking the glass cavity cooling channel.
6、在传热系数要求高的地域,可根据项目定位,在型材隔热腔体内添加保温隔热材料,满足K值要求。
6. In areas with high heat transfer coefficient requirements, heat insulation materials can be added into the profile insulation chamber to meet the K value requirements according to the project location.
7、外门:住所首层住户通向花园的外平开门应设门槛,制止不设门槛,门底部用毛刷关闭。住所首层住户通向花园的双扇平开外门,关闭后两扇应咬合搭接,制止中心留缝用毛刷关闭。
7. Outdoor: The flat door of the first floor of the dwelling house to the garden should be set a threshold to prevent the door from being set, and the bottom of the door should be closed with a brush. Residents on the first floor of the dwelling have two flat open doors to the garden. After closing, the two doors should be bitten and overlapped to prevent the center seam from closing with a brush.
安全技能要求
Safety skill requirement
1、玻璃扣条:玻璃扣条应装置在室内一侧,制止将内开窗翻转成外开窗使扣条装置在室外一侧,确保防盗、安全、玻璃替换的要求,不留渗漏危险。
1. Glass buckles: Glass buckles should be installed on the indoor side, prevent the inside window from turning into the outside window so that the buckle device on the outdoor side, to ensure theft, safety, glass replacement requirements, no leakage risk.
2、锁点:为进步外窗抗风压强度及防盗功能,外窗应选用多点锁。锁点设置应满足五金厂家规划装置手册要求。
2, lock point: to improve the external window resistance to wind pressure and anti-theft function, the external windows should use multiple locks. The installation of locking points shall meet the requirements of hardware manufacturers' planning device manuals.
3、单元进口外门尺度不该过大,以确保合页等五金配件的可靠性,避免发生安全事故。

3. The dimension of the outer door of the unit inlet should not be too large to ensure the reliability of the hardware fittings such as hinge and avoid safety accidents.

(更多关注新闻动态,请关注):http://www.jnclmcc.com/

[声明] 本站图片均由网站所有方提供,部分图片来源于网络,如有任何疑问请第一时间与我们联系,未经沟通本站不承担相关法律责任!
在线咨询