春林门窗

联系我们
济南槐荫春林门窗厂
地址:济南栗山路美里湖消防站对面
电话:13506414902
手机:13506414902
联系人:张经理
当前位置:首页-新闻资讯
新闻资讯
肯德基门检查达标分为这几布!
来源: 2018-12-06 10:24:58
扼要介绍肯德基门查看:关于肯德基门铝合金产品来说,外观非常重要,由于它的首要材料是铝型材,假设没有腐蚀的特征,很快就会蒙上暗影,所以将进行外表处理。外表处理一般是为了取得出色的装饰功用和防护功用,因而耐腐蚀性是铝合金肯德基门窗产品的重要方针。
Brief introduction to KFC door inspection: For KFC door aluminium alloy products, appearance is very important, because its primary material is aluminium profiles, assuming there is no corrosion characteristics, it will soon be shadowed, so the appearance will be treated. Appearance treatment is generally to achieve excellent decorative and protective functions, so corrosion resistance is an important policy for KFC doors and windows.
一般来说,铝合金产品外表处理具有出色的防护功用,其防护功用更好,尤其是喷雾产品能够恶劣的环境条件下使用的产品,铝合金的耐腐蚀实验方法的点评有很多种,其间,盐雾实验和更广泛用热实验。
Generally speaking, the surface treatment of aluminum alloy products has excellent protective function, and its protective function is better. Especially when spraying products can be used in harsh environmental conditions, there are many reviews on the corrosion resistance test methods of aluminum alloys, among which salt spray test and the most extensive heat test are the most widely used.
肯德基门窗的质量操控首要包括所用材料的质料、门窗用型材和制品门窗等三个方面。质料和型材,都已有相应的标准规则,首要是查验外表状况以及型材的耐低温冲击功用和高温缩短变形等。
The quality control of KFC doors and windows mainly includes materials used, profiles used for doors and windows, and doors and windows manufactured. There are corresponding standard rules for materials and profiles. The first thing is to check the appearance, low temperature impact resistance and high temperature shortening deformation of profiles.
制品门窗应操控查验的首要项目为:抗风压功用、气密性、水密性、保温功用、空气声隔声功用、采光功用以及各种机械力学功用。
The main items for control and inspection of products'doors and windows are: wind pressure function, air tightness, water tightness, heat preservation function, air sound insulation function, lighting function and various mechanical functions.
三性方针是肯德基门窗功用等级的要害方针,建筑师对建筑物进行设计时,用于建筑物工程上的肯德基门窗的三性等级,是必需的方针。关于别的三性,由于目前还没有对其进行强行规则·所以一般只在工程上有这一要求时,才对其进行检。

The three-character policy is the key policy of the functional grade of KFC doors and windows. When architects design buildings, the three-grade policy of KFC doors and windows used in building engineering is a necessary policy. As for the other three characteristics, there are no mandatory rules for them at present, so they are usually checked only when there is such a requirement in engineering.

肯德基门窗的查验内容因工序不同而异,如切开下料工序就是下料尺度的准性,而焊接工序又首要是焊好的门窗的尺度精确性,关于成窗而言,除了尺度查验外,还要对门窗的启团功用进行检·当然焊接的角强度检是肯德基门窗加工中必不可少的检测项目,它是关系到门窗使用寿命的要害数据。
The inspection contents of KFC doors and windows vary according to different procedures. For example, cutting and cutting process is the accuracy of cutting scale, while welding process is the first step to measure the accuracy of welded doors and windows. As for window forming, besides scale inspection, it is also necessary to check the opening function of doors and windows. Of course, the corner strength inspection of welding is KFC doors and windows. Inspection items are indispensable in processing, which are the key data related to the service life of doors and windows.
所谓角强度就是焊接角的强度,用专门的角强度测试仪进行检测。在焊好的型材上截取长200m左右的一个角,放到专门的模子上,以实验机空载的速度对焊角加压,直至焊角决裂,读取焊角决裂时查验仪器上的读数,便是焊角强度。
The so-called angular strength is the strength of the welding angle, which is tested by a special angular strength tester. Cut a corner about 200 m long on the welded profile and put it on a special die. Pressure the welding angle with no-load speed of the experimental machine until the welding angle cracks. Read the reading on the inspection instrument when the welding angle cracks, that is, the welding angle strength.
一般来说焊角强度越大,其焊角功用越好,门窗反抗风压的才能就越大,反之亦然。这个角强度的检,在新頒布的肯德基门型材标准中,将其检方法作了更改。
Generally speaking, the greater the strength of the fillet, the better the function of the fillet, the greater the ability of windows and doors to resist wind pressure, and vice versa. This angular strength test has been changed in the newly promulgated KFC door profile standard.
[声明] 本站图片均由网站所有方提供,部分图片来源于网络,如有任何疑问请第一时间与我们联系,未经沟通本站不承担相关法律责任!
在线咨询