春林门窗

联系我们
济南槐荫春林门窗厂
地址:济南栗山路美里湖消防站对面
电话:13506414902
手机:13506414902
联系人:张经理
当前位置:首页-新闻资讯 -公司动态
公司动态
门窗的综合选用要注意哪些知识?
来源: 2020-11-06 18:06:50
1、木门窗窗的主控项目有品种、材质等级、规格、尺寸、含水率、框扇的线型以及人造板中的甲醛量是否在国家有关规定以内;木门窗的结合处以及安装配件处不得有木节或已添补的木节,如有该种情况出现,应建议其换一种产品或者停止使用,以避免其中的安全隐患。木门窗制作安装的允许偏差和检验方法。
1. The main control items of wooden doors and windows include variety, material grade, specification, size, moisture content, line type of frame and leaf, and whether formaldehyde content in wood-based panel is within the relevant national regulations; there shall be no knots or added knots at the joint of wooden doors and windows and the installation accessories. In case of such situation, it is recommended to change a product or stop using it to avoid safety Hidden danger. The allowable deviation and inspection method of wooden doors and windows.
2、门窗应采用烘干的木材,含水率不宜大于8-12%。
2. Doors and windows should be dried wood, moisture content should not be greater than 8-12%.
3、木门窗框与砖石砌体、混凝土或抹灰层接触部位以及固定用木砖等均应进行防腐处理。
3. Anti corrosion treatment shall be carried out on the contact parts of wooden door and window frame with masonry, concrete or plastering layer, and wood bricks for fixing.
4、木门窗框与墙体间隙的填嵌材料应符合设计要求,填嵌应饱满。
4. The filling material for the gap between the wooden door and window frame and the wall shall meet the design requirements, and the filling shall be full.
5、木门窗的安装位置、开启方向及连接方式应符合设计要求。
5. The installation position, opening direction and connection mode of wooden doors and windows shall meet the design requirements.
6、木门窗扇安装必须牢固、开关灵活、关闭严密,无走扇、翘曲现象。

6. Wooden door and window leaf must be installed firmly, switch flexibly, close tightly, and there should be no fan moving and warping.

济南铝木复合门窗

7、金属门窗的主控项目有品种、类型、规格、尺寸、性能、开启方向、安装位置、连接方式、型材的壁厚应符合设计要求,防腐处理以及填嵌、密封处理应该符合国家相关规定。
7. The main control items of metal doors and windows include variety, type, specification, size, performance, opening direction, installation position, connection mode and wall thickness of profiles. The anti-corrosion treatment, filling and sealing treatment shall comply with relevant national regulations.
8、塑钢门窗的验收项目与金属门窗类似,详见《建筑装饰装修工程质量验收标准》。
8. The acceptance items of plastic steel doors and windows are similar to those of metal doors and windows. For details, please refer to the quality acceptance standard of building decoration engineering.
9、木门窗的木材品种、材质等级、规格、尺寸、框扇的线型应符合设计要求。
9. The wood variety, material grade, specification, size and line type of frame and leaf of wooden doors and windows shall meet the design requirements.
10、筑外门窗安装必须牢固,严禁在砌体上用射钉固定。
10. The external doors and windows must be installed firmly, and it is forbidden to fix them with shooting nails on the masonry.
11、合板门,不得有脱胶、刨透表层、戗茬等现象,上下冒头的透气孔应顺畅。
11. The laminated door shall be free of degumming, surface gouging and stubble, and the air holes of upper and lower heads shall be smooth.
12、门窗表面应洁净,不得有刨痕、锤印。
12. The surface of doors and windows should be clean and free of gouge and hammer marks.
13、门窗的割角拼缝严密平整,框扇裁口顺直,刨面平整。
13. The cut corners and seams of doors and windows shall be tight and flat, and the cutting edge of frame and leaf shall be straight and the planed surface shall be smooth.
14、木门窗披水、盖口条、压缝条、密封条的安装应顺直,与门窗结合应牢固、严密。
14. Wooden doors and windows should be installed smoothly and tightly with doors and windows.
15、门窗制作安装的允许偏差和检验方法应符合表1-3的规定。
15. The allowable deviation and inspection method for the fabrication and installation of doors and windows shall comply with the provisions in table 1-3.
16、门窗安装的留缝限值、允许偏差和检验方法a
16. Limit value, allowable deviation and inspection method for installation of doors and windows
[声明] 本站图片均由网站所有方提供,部分图片来源于网络,如有任何疑问请第一时间与我们联系,未经沟通本站不承担相关法律责任!
在线咨询